Process Operation Technology

I invite you to join Process Operation Technology website

You can find everything about industry area
Your Engineering Reference
Your Guide in your Career

You can find new news about Process Operation Technology
You can find all famous magazines
You can find all New updated programs

With Operation Technology website, You're on the right way
Process Operation Technology

Oil, gas and petrochemical process industries


    GLOBE VALVES

    Share
    avatar
    Talib Al_Munawri
    Director-General
    Director-General

    Posts : 337
    Join date : 2009-07-03
    Age : 30
    Location : Sultanate of Oman

    GLOBE VALVES

    Post by Talib Al_Munawri on Thu Sep 17, 2009 10:15 pm

    GLOBE VALVES



    A globe valve is used to control the amount of flow. The valve can
    be operated in any position from the fully closed position to the
    fully open position. The valve disc is globe shaped (circular).
    The valve operates by raising and lowering the valve disc into
    a circular seat. There is no contact between the seat and disc
    ends when the flow through the valve starts. Only a few turns of
    the handwheel are needed to fully open or close the valve.
    (The gate valve needs many turns to open or close it.)



    There are partitions inside a globe valve. The fluid flowing
    through the valve must make two 90 degree turns. The flow is
    "under and over" to prevent wear to the seat. Therefore, there is
    a high pressure drop in the valve. It is easier to control this
    kind of flow.


    Globe valves are usually smaller if they are hand controlled and
    need to be opened and closed often. The direction of the fluid
    flow through the valve keeps the seat and disc clean.


      Current date/time is Sat Nov 18, 2017 3:23 pm